Abstract：Wide-azimuth and high-density seismic exploration technology plays an increasingly important role in the exploration and development of oil and gas nowadays. The offset vector tile (OVT) technology for wide-azimuth and high-density seismic exploration is now in the stage of large-scale industrial application after years of technical development. However，the current design of high-density and wide-azimuth 3D seismic geometry does not fully consider OVT attributes. As a result，the subsequent OVT processing and five-dimensional seismic interpretation in the OVT domain are affected and the final application effect of OVT technology cannot meet the expectations. This paper studies the quantitative calculation method of OVT attribute uniformity in 3D seismic geometry. Firstly，the corresponding OVT is extracted from the 3D orthogonal observation system. Secondly，the offset and azimuth attributes of each OVT are calculated，and the average offset and azimuth of each OVT are counted as the standard value of the OVT. In addition，the mean square difference of each OVT is calculated as the OVT attribute evaluation value. Finally，OVT attributes of the 3D seismic geometry are quantitatively evaluated by the mean values and mean square difference of all OVT attribute evaluation values. The results show that the smaller corresponding value leads to better OVT attributes of the 3D seismic geometry，and the larger corresponding value results in poorer OVT attributes of the geometry.
印兴耀，张洪学，宗兆云.OVT数据域五维地震资料解释技术研究现状与进展[J].石油物探，2018，57(2)：155-178.YIN Xingyao，ZHANG Hongxue，ZONG Zhaoyun.Research status and progress of 5D seismic data interpretation in OVT domain[J].Geophysical Prospecting for Petroleum，2018，57(2)：155-178.
[7]
赵邦六，张宇生，曾忠，等.川中地区侏罗系沙溪庙组致密气处理和解释关键技术与应用[J].石油地球物理勘探，2021，56(6)：1370-1380.ZHAO Bangliu，ZHANG Yusheng，ZENG Zhong，et al.Key technology and application of processing and interpretation of tight gas in Jurassic Shaximiao Formation in Centreal Sichuan Basin[J].Oil Geophysical Prospecting，2021，56(6)：1370-1380.
[8]
陈敬国，王成河，白旭明，等.三维观测系统属性定量评价方法探讨[J].中国石油勘探，2015，20(2)：68-74.CHEN Jingguo，WANG Chenghe，BAI Xuming，et al.Quantitative evaluation method of 3D geometry attributes[J].China Petroleum Exploration，2015，20(2)：68-74.
[9]
碗学俭，葛雪钦，张松平，等.三维观测系统采样均匀性分析方法的研究[J].中国石油勘探，2009，14(6)：42-48.WAN Xuejian，GE Xueqing，ZHANG Songping，et al.Research of 3D geometry sampling uniformity analysis method[J].China Petroleum Exploration，2009，14(6)：42-48.
[10]
吴永国，尹吴海，何永清，等.三维观测系统属性均匀性的定量分析[J].石油地球物理勘探，2012，47(3)：361-365.WU Yongguo，YIN Wuhai，HE Yongqing，et al.A uniformity quantitative method for 3D geometry attri-butes[J].Oil Geophysical Prospecting，2012，47(3)：361-365.
[11]
谢城亮，杨萌萌，刘学伟，等.基于面元炮检距均匀性相关系数的三维观测系统评价[J].石油地球物理勘探，2012，47(6)：849-857.XIE Chengliang，YANG Mengmeng，LIU Xuewei，et al.3D seismic geometry evaluation based on the correlation coefficient of bin offset distribution uniformity [J].Oil Geophysical Prospecting，2012，47(6)：849-857.
[12]
王超越，董守华.高密度三维地震观测系统炮检距均匀性评价[J].地球物理学进展，2020，35(6)：2220-2227.WANG Chaoyue，DONG Shouhua.Evaluation of high-density 3D seismic layout offset distance uniformity[J].Progress in Geophysics，2020，35(6)：2220-2227.
[13]
姚江.基于属性评价分析的三维观测系统优化设计与应用效果[J].石油物探，2014，53(4)：384-390.YAO Jiang.3D geometry optimization design based on the properties evaluation and analysis[J].Geophysical Prospecting for Petroleum，2014，53(4)：384-390.
[14]
马涛，王彦春，李杨胜，等.OVT属性分析方法在采集设计中的应用[J].石油地球物理勘探，2019，54(1)：1-8.MA Tao，WANG Yanchun，LI Yangsheng，et al.Application of OVT attribute analysis in seismic acquisition [J].Oil Geophysical Prospecting，2019，54(1)：1-8.
[15]
张华，王梅生，吴克，等.基于构建等效子集的观测系统变换[J].石油地球物理勘探，2022，57(4)：815-827.ZHANG Hua，WANG Meisheng，WU Ke，et al.Observation system transformation based on the construction of equivalent subsets[J].Oil Geophysical Prospecting，2022，57(4)：815-827.
